KLARUS ST10 Cree XPG-R5 140 LM 7 Modes LED Tactical/Military Grade Flashlight Torch (1 x AA)[LL0031301]
- Product Feature:
- Variable frequency strobe: easily accessed from any light mode
- Momentary activation
- Intelligent memory function (memorizes the last used lighting mode)
- Super low mode (2 lumens) offering extended runtime
- High-efficiency digitally regulated output - maintains constant brightness
- Easy access side switch
- Max output: 140 Lumens.
- Max run time: 83 hours
- Reverse polarity protection
- One hand operation
Product Specification:Brand:KLARUSModel:ST10LED Emitter Type:Cree XP-G R5Luminous Flux:140-LumenLamp Life:50000 HoursPower Source:
1 x AA (Not Included)Modes:4 lighting levels, 3 flashing modes
----Lighting mode: 140 lumens (1.5hrs) --- 12 lumens (25hrs) --- 60 lumens (4.8hrs)
----Hidden modes: 2 lumens (83hrs) --- SOS --- (60 Lumen, 13.4hrs) --- Beacon (60 Lumens, 70hrs)
----Variable frequency strobe (140 Lumens, 3hrs) ）Input Voltage:0.9-1.8VOperate temperature:-20 ~ +50 degrees celsiusSwitch:
Tactical tail switch for power on and off with momentary activation
Side switch for adjusting brightness output
Rotate the flashlight head to access hidden modes (Super Low, SOS, Beacon)
Strobe access: Press and hold the side switch for 0.5 seconds in any modeConstruction:
Shakeproof and Waterproof to IPX-8 Standard (underwater to 2 meters)Lens:Toughened ultra-clear glassReflector:Textured reflector for smooth beamDimensions:10.7cm(Length) x 2.53cm(Head) x 2cm(body)Weight:53gMateral of Product:Aircraft grade aluminumFlashlight processing technology:
Aerospace Grade Aluminum Body with Military Grade HA Type III anodizing
Product Luminous Efficiency:
- 1 x KLARUS Mi10 LED Flashlight Torch
- 1 x Hoster
- 1 x Lanyard
- 1 x Body Clip
- 2 x Spare o-rings
- 1 x Rubber Switch Boot
- Please do not irradiate it to human eyes,especially for children,or else,it may cause temporary blindness for the harsh light of flashlight.
- Do not meddle with the head of torch or separate the reflector and the bulb.
- Wipe flashlight with soft fabric after use.
- In case of erosion causing roughness of the torch movements,try to clear and air it.
- Silicon grease can be applied to the interface.
- Remove battery if not in use for long period.
- Strongly suggest using the battery with protecting board,so that it can avoid over-charge and over-discharge,and protect battery and prolong its service life.
If you are considering buying this product, you are very welcome to click here and submit your inquiry and we will reply as soon as possible.
Hot selling products