KLARUS XT1A Cree XPG-R5 150 LM 4 Modes LED Tactical/Military Grade Flashlight Torch (1 x AA)[LL0030901]
- Product Feature:
- Dual button tail switch for quick, one-hand operation
- Main switch is easy to find in the dark and will be pressed by default when pressing the tail of the light
- Mode switch is at a lower level than the main switch and provides good tactile feedback
- Strobe can be activated with the Mode switch when the flashlight is on or off, giving instant access to Strobe from any mode
- Forward tactical main switch with momentary activation 6.Maintains constant brightness with very high efficiency
- Max output: 150 ANSI Lumens on high
- Max run time: 50 hours
- Reverse polarity protection protects flashlight and battery from damage when a battery is inserted incorrectly
Product Specification:Brand:KLARUSModel:XT1ALED Emitter Type:Cree XP-G R5Luminous Flux:150-LumenLamp Life:50000 HoursPower Source:
1 x AA (Not Included)Modes:Three lighting modes and 1 flashing mode: -- a)Lighting modes: 150 ANSI lumens (1hrs)--- b)30 lumens (6 hrs)--- c)4 lumens (50hrs)
--- d)Variable frequency strobe: 150 lumens (2hrs)Input Voltage:0.9-1.8VOperate temperature:-20 ~ +50 degrees celsiusSwitch:
a) Tactical main switch for turning the light on and off. Momentary activation from off. b)Dedicated mode switch for instant access to strobe and changing modesConstruction:
Shakeproof and Waterproof to IPX-8 Standard (underwater to 2 meters)Lens:Toughened ultra-clear glassReflector:Textured orange peel reflectorDimensions:11.6cm(Length) x 2.4cm(Head) x 2.26cm(body)Weight:53gMateral of Product:Aircraft grade aluminumFlashlight processing technology:
Aerospace Grade Aluminum Body with Anti Scratching Type III Hard Anodization
Product Luminous Efficiency:
- 1 x KLARUS XT1A LED Flashlight Torch
- 1 x Holster
- 1 x Lanyard
- 1 x Body Clip
- 2 x Spare O-rings
- Please do not irradiate it to human eyes,especially for children,or else,it may cause temporary blindness for the harsh light of flashlight.
- Do not meddle with the head of torch or separate the reflector and the bulb.
- Wipe flashlight with soft fabric after use.
- In case of erosion causing roughness of the torch movements,try to clear and air it.
- Silicon grease can be applied to the interface.
- Remove battery if not in use for long period.
- Strongly suggest using the battery with protecting board,so that it can avoid over-charge and over-discharge,and protect battery and prolong its service life.
If you are considering buying this product, you are very welcome to click here and submit your inquiry and we will reply as soon as possible.
Hot selling products