- By Cree XR-E R2 LED, up to 260-lumen maximum brightness to meet the specific needs of different.
- With red laser,has aim function
- The flashlight head has against tooth, can be used to self-defence or used as a tool
- Waterproof to IPX-8 standard,can be under water 2 M
- High efficiency DC-DC voltage regulator (PWM/PFM style) and circuit.
- Switch between modes: Mode A: Press the tactical ON/OFF button within 2s to cycle through: High, Mid, Low, Quick flashing, SOS flashing, OFF. Mode B: Press the tactical ON/OFF button within 2s to cycle through: Laser on, Laser SOS flashing on, High light on and Laser on, OFF.The Mode A is factory default configuration; the customer. can switch between mode A and mode B by pressing the button more than 3 seconds.Press the button again when the flashlight is on in any mode longer than 5 seconds, the flashlight will be switched off. No need to press several times to be off
- Suitable for the army, police,or outdoor sport as hunting,exploration
|Model: ||ARCHON G3L|
|LED Emitter Type: ||Cree XR-E R2 |
|Luminous Flux: ||260-Lumen |
|Lamp Life: ||100000 Hours |
|Power Source: |
3 x C Type Battery(Unincluded)
A (High>Medium>Low>Fast Strobe>SOS>OFF)
B (Laser on>Laser SOS flashing on>High Light on and Laser on>OFF)
|Beam distance: |
|Max Runtime: |
Tail cap Clicky/Clickie
Shakeproof and waterproof
|Lens: ||Toughened ultra-clear glass lens with anti-reflective coating |
|Reflector: ||Orange peel aluminum reflector |
|Impact Resistance: ||1.5 m |
|Dimensions: ||26cm(Length) x 5.5cm(Diameter) |
|Weight: ||0.317 kg |
|Materal of Product: ||Durable aircraft-grade aluminum |
|Flashlight processing technology: |
Premium Type III hard-anodized anti-abrasive finish
Product Luminous Efficiency:
- 1 x LED Flashlight
- Please do not irradiate it to human eyes,especially for children,or else,it may cause temporary blindness for the harsh light of flashlight.
- Do not meddle with the head of torch or separate the reflector and the bulb.
- Wipe flashlight with soft fabric after use.
- In case of erosion causing roughness of the torch movements,try to clear and air it.
- Silicon grease can be applied to the interface.
- Remove battery if not in use for long period.
- Strongly suggest using the battery with protecting board,so that it can avoid over-charge and over-discharge,and protect battery and prolong its service life.
If you have already purchased this product, please click here
to write a short review and receive 5-30 DM Points.
If you are considering buying this product, you are very welcome to click here
and submit your inquiry and we will reply as soon as possible.
Customer Reviews Only For Verified Buyers. Write a review and get DM Points
| No inquiries. Before buying this product, if you have any questions about the product, delivery, payment,etc. please feel free to submit your inquiries and we will reply to you within 24 hours.